Santa Clarita Valley, CA 91350, 91355, 91321 & 91381 • SCV
Check your Valencia, Newhall, Saugus, or Canyon Country (91350, 91355, 91321 & 91381) home for mold, moisture, and air quality issues. Schedule your Test-Only inspection.
Local Housing & Environmental Insights • 91350, 91355, 91321 & 91381
The Santa Clarita Valley — including Valencia, Newhall, Saugus, and Canyon Country — presents a distinct inland moisture profile. While the 91350, 91355, 91321, and 91381 zip codes are predominantly arid, sharp seasonal temperature fluctuations create localized condensation conditions for homeowners.
A primary consideration across the SCV is thermal stress on building envelopes. Wide shifts between warm afternoons and cool desert-edge nights cause stucco, roof flashings, and window seals to age faster — creating hairline entry points for winter rainwater that can saturate wall cavities and remain hidden until warmer weather arrives.
Schedule a professional inspection to identify potential mold risks in your Santa Clarita Valley home.
Your Friendly Technical Interpreter. Test-Only
Visual inspections that may include moisture content readings, humidity measurements, and checking common areas where moisture intrusion is often a risk. Includes a detailed written report with findings and recommendations.
Learn More →Our professional mold samples are analyzed by an AIHA-accredited laboratory, with standard results typically available within 2 business days. Rush processing, including next-business-day reporting, is available for an additional fee.
Learn More →Evaluate airborne mold spores, species detected, and ambient air quality. When appropriate, wall cavity air sampling may also be performed.
Learn More →PRV (Post Remediation Verification) or Clearance Testing services involve independent verification and testing to ensure mold remediation was successfully completed.
Learn More →A vital aspect for performing due diligence during real estate transactions, Tanjun Mold Inspections offers pre-purchase and pre-sale inspections for buyers, sellers, and agents in Santa Clarita and nearby communities.
Learn More →Promptly identify hidden moisture and potential mold growth after leaks, floods, or plumbing failures to minimize damage.
Learn More →Prompt turnaround times, detailed reports, and friendly, easy-to-understand explanations.
$350+
Base fee starting at $350 for homes up to 1,500 sq. ft.
$95
Per air or surface sample analyzed by an AIHA-accredited lab.
$440+
Starting at $440 for targeted air quality only visit & lab report.
$550+
Starting at $550 for independent PRV visual, moisture & air testing.
Schedule Appointment
If you’re buying a home, noticing a musty odor, or dealing with past water damage, a professional mold inspection can help you make informed decisions.
Professional mold inspections and Indoor Air Quality Testing in Santa Clarita Valley, CA can help you identify potential risks early on to maintain a healthy indoor environment — with accurate, reliable results you can trust.
EDUCATOR. NEIGHBOR. SPECIALIST.
"Takes Time to Teach..."
We take time — to provide a friendly and understandable explanation of the inspection findings and the technical details of the report to customers — who are not lab techs.
"Opposite of Corporate..."
Since we're not a chain or franchise — we are not under pressure to meet corporate sales quotas. Instead, we invest in the time and personal attention needed for each unique job.
AIHA Certified
All air and surface samples are logged and processed utilizing trusted, independent AIHA-accredited laboratories with secure chain-of-custody protocols. Reliable data — means informed decisions.
Samples are sent to an AIHA (American Industrial Hygiene Association) accredited laboratory that specializes in environmental microbiology.
They provide very technical and detailed information that we analyze and summarize so that it is more friendly and useful to our customers.
The lab analysis will report on any mold found, the amount and the mold types detected (such as Aspergillus/Penicillium, Stachybotrys, Chaetomium, Ulocladium). We determine whether the sample indicates:
Select a mold genus below to review its environmental characteristics and common indoor substrates.
Alternaria is one of the most common molds and is abundant worldwide. This genus contains around 40 to 50 different species, only a few of which are commonly found indoors. Alternaria spores are easily dispersed through the air by wind. Alternaria can grow on a variety of substrates indoors when moisture is present.
Cladosporium is an abundant mold worldwide and is normally one of the most abundant spore types present in both indoor or outdoor air samples. This genus contains around 20 - 30 different species. Cladosporium produces dry spores that are formed in branching chains. Spores are released by twisting of the spore-bearing hyphae as they dry. Thus, the spores are most abundant in dry weather. Cladosporium can be found anywhere indoors, including textiles, bathroom tiles, wood, moist windowsills, and any wet areas in a home. Some species of Cladosporium grow at temperatures near or below 0(C) / 32(F) and can often be found on refrigerated foodstuffs and even frozen meat.
Penicillium / Aspergillus are two separate genera of molds that are so visually similar that they are commonly discussed together as a group. Together, there are approximately 400 different species of Penicillium / Aspergillus. Penicillium / Aspergillus produce dry spore types that are easily dispersed through the air by wind. These fungi serve as a food source for mites, and therefore can be dispersed by mites and various insects as well. Penicillium / Aspergillus are found throughout the home. They are common in house dust, growing on wallpaper, wallpaper glue, decaying fabrics, wallboard, moist chipboards, and behind paint. They have also been isolated from blue rot in apples, dried foodstuffs, cheeses, fresh herbs, spices, dry cereals, nuts, onions, and oranges.
Chaetomium is a common mold worldwide. This genus contains around 80 - 90 different species. Chaetomium spores are formed inside fruiting bodies. The spores are released by being forced out through a small opening in the fruiting body. The spores are then dispersed by wind, water drops, or insects. Chaetomium can grow in a variety of areas indoors, but is usually found on cellulosebased or woody materials in the home. It is very common on sheetrock paper that is or has been wet.
Stachybotrys is ubiquitous in nature. This genus contains about 15 species. Stachybotrys produces wet slimy spores and is commonly dispersed through water flow, droplets, or insect transport, less commonly through the air. Stachybotrys is common indoors on wet materials containing cellulose such as wallboard, jute, wicker, straw baskets, and other paper materials.
Santa Clarita Valley, CA 91350, 91355, 91321 & 91381 • Local Mold Insights
Despite low outdoor humidity, SCV homes can experience condensation caused by wide day-to-night temperature swings. When warm indoor air meets cooler surfaces like single-pane window sills, uninsulated attic decking, or chilled AC vents, localized moisture can form and support mold growth.
Properties in the foothills sit on alluvial soil that can become saturated during winter rains. This creates hydrostatic pressure against foundations, allowing moisture to migrate through concrete walls and into crawl spaces or lower-level rooms.
Homes built in the 1960s–80s often have original copper or galvanized plumbing, aging roof underlayment, and worn window seals that are reaching the end of their service life, making them common sources of slow, undetected leaks.
MICRO Certified Mold Inspector CMI # 86294
InterNACHI (International Association of Certified Home Inspectors) Certified Mold Inspector
IAC2 Certified, IAC2 Mold Certified (International Association of Certified Indoor Air Consultants)
We start with performing a visual inspection of the property, focusing on areas where there may be water damage, moisture issues or suspected mold growth.
With the help of specialized tools we may take environmental readings such as Moisture Content (MC) or humidity levels in order to identify any potential issues.
Surface and Air samples may be recommended depending on the inspection findings or customer concerns. Such samples are sent to an AIHA Accredited Lab that specializes in identifying and analyzing mold.
Once all of the data is collected, we provide a report of our findings. If a mold growth problem is identified, a Remediation Protocol is outlined.
CONTACT US
Let Us Know Your Situation!
Los Angeles County, CA
Ventura County, CA
